CANCF002
Member
Have a machine with a B&R PLC M 264 and the HMI froze when the run button is press. The HMI buts fine. Please advice
B&r plc m264
- Thread starter CANCF002
- Start date
CapinWinky
Member
I haven't ever actually worked with panelware and don't know anything about them, but if the HMI program is stored on some kind of memory card, you should be able to just buy a replacement HMI on ebay and hope that it's a hardware issue and not a corrupt memory card issue.
Since you're talking about a PLC that has been obsolete for multiple decades, you might want to look to look to the future. If the OEM is still in business, they can probably retrofit the machine with a C70 and some X20. If not and you have a drawing set, any B&R integrator should be able to pull it off.
Since you're talking about a PLC that has been obsolete for multiple decades, you might want to look to look to the future. If the OEM is still in business, they can probably retrofit the machine with a C70 and some X20. If not and you have a drawing set, any B&R integrator should be able to pull it off.
Similar Topics
GitHub Link: Open Industry Project
This is a side project I've been working on for some time.
The goal is to provide an open platform for...
Dear All,
Currently i'm working with Endress Hauser flowmeter and AB PLC and try to integrate with 2 items.
Flow meter spec using is Promass...
Can I connect two A-B Panel View 7 to a A-B PLC. Same graphics etc. One on the local control panel and the other Panel View 7 in a remote control...
Hello,
I'm working with Studio 5000 and ME Station, and I'm trying to find a way to detect if the PC with the HMI is shut down or not.
I've tried...
Hi all smart and knowledgeable people.I have a hmi connected to 2 Plcs via ethernet.These 2 Plcs connected to control 2 systems in one machine...
