Hello,
We have a B&R X20 CP3584 controlling our printing press communications.
The program on the compact flash card wont load, we were running fine and then I swapped over the card for a backup card I had just bought and something happened and now neither card will boot the controller to rule out the cards the supplier sent me another card which we have put in controller but still no joy.
Is there any other was of booting the the device either by USB or Ethernet. Or anything else I could try.
Also if there are any B&R experts in the London/Kent area let me know.
Thanks in advance
We have a B&R X20 CP3584 controlling our printing press communications.
The program on the compact flash card wont load, we were running fine and then I swapped over the card for a backup card I had just bought and something happened and now neither card will boot the controller to rule out the cards the supplier sent me another card which we have put in controller but still no joy.
Is there any other was of booting the the device either by USB or Ethernet. Or anything else I could try.
Also if there are any B&R experts in the London/Kent area let me know.
Thanks in advance