Mishtavince
Member
Hello Everyone,
This is my first post and this website has helped me a lot since i started work, the advice found here is just priceless.
Now I need help, Could any one kindly tell me the basic I/O list used to control a pump from your experience.
I'm a new recruit at this company and have been told to work on a project which is to write a PLC program to control 6 pumps for an underground water storage level control. The contracting company has not given us an I/O list. I'm a recent joinee and im still learning PLC , from my point of view ive come up with the following:
DI
1) Pump on 2) Pump off 3) Emergency Stop 4) Phase Loss 5) Voltage Trip
6) Level Switch 7)Auto 8) manual 9)open valve 10) close valve
But im lost..
I would greatly appreciate it if some one could guide me in the right way for selecting the basic I/O for a pump control. i.e Digital input/output and Analog input/output.
This information will help me a long way.
thank you.
This is my first post and this website has helped me a lot since i started work, the advice found here is just priceless.
Now I need help, Could any one kindly tell me the basic I/O list used to control a pump from your experience.
I'm a new recruit at this company and have been told to work on a project which is to write a PLC program to control 6 pumps for an underground water storage level control. The contracting company has not given us an I/O list. I'm a recent joinee and im still learning PLC , from my point of view ive come up with the following:
DI
1) Pump on 2) Pump off 3) Emergency Stop 4) Phase Loss 5) Voltage Trip
6) Level Switch 7)Auto 8) manual 9)open valve 10) close valve
But im lost..
I would greatly appreciate it if some one could guide me in the right way for selecting the basic I/O for a pump control. i.e Digital input/output and Analog input/output.
This information will help me a long way.
thank you.