Visinedrops
Member
Hello. I've been using the answers in this forum for a while now, so thank you. Usually I can find the answer I'm looking for with a basic Google search, but this one has me dumbfounded:
Logix Designer - L83, V35.11
Tags: REAL-type: Array[0] through Array[47] & Level_Sensor
I need to have the value of Level_Sensor registered in Array[0] to track dryer bed depth every 2 minutes. However, the value in Array[0] needs to be moved to Array[1] and the new value of Level_Sensor to be deposited into Array[0] all the way through to Array[47]. After 47 the values can disappear.
Picture attached: Pink and White blocks are the places I need to move data into from left to right to track the level of the bed depth through the dryer.
Is there a simple way to do this?
Logix Designer - L83, V35.11
Tags: REAL-type: Array[0] through Array[47] & Level_Sensor
I need to have the value of Level_Sensor registered in Array[0] to track dryer bed depth every 2 minutes. However, the value in Array[0] needs to be moved to Array[1] and the new value of Level_Sensor to be deposited into Array[0] all the way through to Array[47]. After 47 the values can disappear.
Picture attached: Pink and White blocks are the places I need to move data into from left to right to track the level of the bed depth through the dryer.
Is there a simple way to do this?