I was so happy. I finally invested in a new laptop. I even found one with a seriel port. I got a new Dell latitude D820. It has dual core intel processor 1.83GHZ with 2 gig ram. I even got the autocad lite from them (which by the way works great for typical control panel dwg requirements along with the block library I had built up).
The honeymoons over. I have XP Pro SP2. I have RS logix 500 (starter), panel builder 32 and rs linx lite. All are two to three years old and I let the support drop. I am getting fatal blue screens now. Sometimes it happens on boot. The one thing that sets it off everytime is when I try to close RS linx. Rs linx automatically opens. It controls com 1. I needed com 1 the other day for easysoft PRO to program some smart relays. I am downloading a free update for RS linx now. Any suggestions?
The honeymoons over. I have XP Pro SP2. I have RS logix 500 (starter), panel builder 32 and rs linx lite. All are two to three years old and I let the support drop. I am getting fatal blue screens now. Sometimes it happens on boot. The one thing that sets it off everytime is when I try to close RS linx. Rs linx automatically opens. It controls com 1. I needed com 1 the other day for easysoft PRO to program some smart relays. I am downloading a free update for RS linx now. Any suggestions?