stanhffgn
Member
hello I am working on a school project were I am building a Safe were people can store valuables like phones.
these people can create there own password of 3 digits which they give in on an screen which runs scada.
but when they select a number this gives a boolean output to the PLC, but to make the complete password I need to be able to connect this output to a specific value (Int).
My question is how can I do this.
these people can create there own password of 3 digits which they give in on an screen which runs scada.
but when they select a number this gives a boolean output to the PLC, but to make the complete password I need to be able to connect this output to a specific value (Int).
My question is how can I do this.