Does anyone know how to calculate the savings from now needing to run an air compressor all day?
Basically I have a design that replaced 6 * 1" bore x 4"stroke cylinders that ran at 90psi.
I'm sure there's a good amount of savings there, but not exactly sure how to figure out how much less the compressor would need to run.
Thank you for the help!
Basically I have a design that replaced 6 * 1" bore x 4"stroke cylinders that ran at 90psi.
I'm sure there's a good amount of savings there, but not exactly sure how to figure out how much less the compressor would need to run.
Thank you for the help!