HamzaAhmed
Member
Hello guys,
i am using Delta software PLC ladder (WPLSoft) and HMI programing(DOPSoft) for learning but in the simulation the PLC and HMI are not talking with each others without a real PLC and real wiring connections.
how can i simulate using both of them in the same time?
foe example: if Y0 is on on the PLC simulation i need to see it in HMI in the same time.
i am using Delta software PLC ladder (WPLSoft) and HMI programing(DOPSoft) for learning but in the simulation the PLC and HMI are not talking with each others without a real PLC and real wiring connections.
how can i simulate using both of them in the same time?
foe example: if Y0 is on on the PLC simulation i need to see it in HMI in the same time.