mrtweaver
Member
Greetings, I would like to hear from the members of this group who have a wide knowlege of CanOpen. I know that CanOpen is much faster than say something like Modbus.
What I am tryng to do right now is have a Horner XLT talk via CanOpen to a Lexium 05 Drive. I have followed just about everything I can think of and feel that the registers are configured correctly. However it seems as though I keep getting an NMT error and it seems to be with the slave, which is the Lexium Drive. if I take a twido PLC and using CanOpen connect to the lexium drive it communicates fine, but for some reason the XLT from Horner just wont seem to work properly. Was wondering if anyone on here has tried to integrate using CanOpen and what pitfalls and such I should look out for. Also it would be really helpful if someone on here had integrated a Horner to a Lexium using CanOpen.
I am wits end. Any and all assistance greatly appreciated. I have attached the program as I have it started here so as if you want you can look at my CanOpen config maybe someone here is more familiar with CanOpen can see where the communication error is. Thanks and have a great day,.
What I am tryng to do right now is have a Horner XLT talk via CanOpen to a Lexium 05 Drive. I have followed just about everything I can think of and feel that the registers are configured correctly. However it seems as though I keep getting an NMT error and it seems to be with the slave, which is the Lexium Drive. if I take a twido PLC and using CanOpen connect to the lexium drive it communicates fine, but for some reason the XLT from Horner just wont seem to work properly. Was wondering if anyone on here has tried to integrate using CanOpen and what pitfalls and such I should look out for. Also it would be really helpful if someone on here had integrated a Horner to a Lexium using CanOpen.
I am wits end. Any and all assistance greatly appreciated. I have attached the program as I have it started here so as if you want you can look at my CanOpen config maybe someone here is more familiar with CanOpen can see where the communication error is. Thanks and have a great day,.