Hello, guys. Need a help very badly.
I have a TIA Portal 15.1 installed on a virtual machine and I'm trying to connect to the 1512SP F-1 PN PLC. I can ping it, I can see it online,I can blink the LED, I can assign an IP address, but I can't download a program and can't go online. If IP address in HW-config is the same as in the PLC - it shows as incompatible. If the IP address is different - it just gives me 0132-000002 error "selected online target could not be reached". I can't upgrade the firmware or reset to factory settings, the diagnostic buffer is not available.
Help me please!
I have a TIA Portal 15.1 installed on a virtual machine and I'm trying to connect to the 1512SP F-1 PN PLC. I can ping it, I can see it online,I can blink the LED, I can assign an IP address, but I can't download a program and can't go online. If IP address in HW-config is the same as in the PLC - it shows as incompatible. If the IP address is different - it just gives me 0132-000002 error "selected online target could not be reached". I can't upgrade the firmware or reset to factory settings, the diagnostic buffer is not available.
Help me please!