dduquette2141
Member
Hi All
I have a Compactlogix L30ER, its on a network with a Wago 750-363, and a Keyence safety controller.
PLC- 10.40.8.10
Safety- 10.40.8.11
Wago- 10.40.8.12
255.255.255.0
I set the IP addresses of all the hardware. The PLC took the IP address over USB. I can see it in the project file and in RSLinx. Unfortunately I can not see the PLC in the ethernet device driver and I can not ping it either. I spoke with someone they told me to set up a new driver in linx and if that doesn't work to Compact Harmony. I set up the new driver and it seemed to work. I could now go online with it and see the safety control in the project tree, BUT NOT the Wago IO. So I tried the compact Harmony in RSlinx and now I am back to square one. I can no longer see the PLC in linx or ping it.
In a last stitch effort I Flashed the firmware again to no avail.
I saw a video where someone one was having a similar issue and they went into the program files for RSCommon and deleted the Harmony files so I tried that as well.
I should add that I can not see the Wago Fieldbus coupler in RSlinx either but have no problem accessing it through my web browser.
I have a Compactlogix L30ER, its on a network with a Wago 750-363, and a Keyence safety controller.
PLC- 10.40.8.10
Safety- 10.40.8.11
Wago- 10.40.8.12
255.255.255.0
I set the IP addresses of all the hardware. The PLC took the IP address over USB. I can see it in the project file and in RSLinx. Unfortunately I can not see the PLC in the ethernet device driver and I can not ping it either. I spoke with someone they told me to set up a new driver in linx and if that doesn't work to Compact Harmony. I set up the new driver and it seemed to work. I could now go online with it and see the safety control in the project tree, BUT NOT the Wago IO. So I tried the compact Harmony in RSlinx and now I am back to square one. I can no longer see the PLC in linx or ping it.
In a last stitch effort I Flashed the firmware again to no avail.
I saw a video where someone one was having a similar issue and they went into the program files for RSCommon and deleted the Harmony files so I tried that as well.
I should add that I can not see the Wago Fieldbus coupler in RSlinx either but have no problem accessing it through my web browser.
Last edited: