alfi_yasin
Member
Dear all
I'm using cc link A1SJ61BT11 with cpu A173UHCPU, this cc link connected to inverter FR A 540 and FR E 540.
Since they want to replace the inverter with new type FR A 740 and FR E 740 , the old type is difficult to find.
Because the CC Link Version is different, the communication became disable.
I already set the cclink A7NC became ver 1. Pr 544 = 1
Another setting is for cc link address and baud rate
But the inverter can’t run , even already give command from PLC, any setting I should do again ?
Regards
alfi
I'm using cc link A1SJ61BT11 with cpu A173UHCPU, this cc link connected to inverter FR A 540 and FR E 540.
Since they want to replace the inverter with new type FR A 740 and FR E 740 , the old type is difficult to find.
Because the CC Link Version is different, the communication became disable.
I already set the cclink A7NC became ver 1. Pr 544 = 1
Another setting is for cc link address and baud rate
But the inverter can’t run , even already give command from PLC, any setting I should do again ?
Regards
alfi