BillRobinson
Member
OK PLC'ers
Here's the challenge
Create an equivalent Set Dominate Latch, in RSLogix 5000, where the initial output is 0. You can use only function blocks.
By set dominate I mean a latching function which sets the output to 1 when both the set and reset values are 1.
There is already a Set Dominate Latch function block in RSLogix 5000; however, its initial output is 1.
I spent a long time trying to do this, the only way I found to do this is to write piece of structured text code.
Here's the challenge
Create an equivalent Set Dominate Latch, in RSLogix 5000, where the initial output is 0. You can use only function blocks.
By set dominate I mean a latching function which sets the output to 1 when both the set and reset values are 1.
There is already a Set Dominate Latch function block in RSLogix 5000; however, its initial output is 1.
I spent a long time trying to do this, the only way I found to do this is to write piece of structured text code.