Good Afternoon ,
I am modifying an existing system . This system presently has the following......
MicroLogix 1500 Serial Communication
Panelview Plus 700 using serial communication IP Address 190.190.192.54
The first phase of this modification is to put in a CompactLogix 1769-L18.
communicating with 3) PowerFlex 40's with 22-COMM-E cards in them.
My plans are to put some motor control on the PanelView Plus 700 that will control the 3) Powerflex 40's thru the CompactLogix L18.
I want to keep the MicroLogix 1500 communicating with the Panelview Plus 700 via serial and Ethernet , but change the IP Address's to a scheme of the following.....
CompactLogix 1769-L18 192.168.100.1
PowerFlex 40 ( 22-COMM-E ) 192.168.100.2
PowerFlex 40 ( 22-COMM-E ) 192.168.100.3
PowerFlex 40 ( 22-COMM-E ) 192.168.100.4
PanelView Plus 700
Change IP Address from 190.190.192.54 to 192.168.100.5
My question is , do you see any communication problems because I change the IP Address on the Panelview Plus 700 screen ?
Thanks so much for your help.
I am modifying an existing system . This system presently has the following......
MicroLogix 1500 Serial Communication
Panelview Plus 700 using serial communication IP Address 190.190.192.54
The first phase of this modification is to put in a CompactLogix 1769-L18.
communicating with 3) PowerFlex 40's with 22-COMM-E cards in them.
My plans are to put some motor control on the PanelView Plus 700 that will control the 3) Powerflex 40's thru the CompactLogix L18.
I want to keep the MicroLogix 1500 communicating with the Panelview Plus 700 via serial and Ethernet , but change the IP Address's to a scheme of the following.....
CompactLogix 1769-L18 192.168.100.1
PowerFlex 40 ( 22-COMM-E ) 192.168.100.2
PowerFlex 40 ( 22-COMM-E ) 192.168.100.3
PowerFlex 40 ( 22-COMM-E ) 192.168.100.4
PanelView Plus 700
Change IP Address from 190.190.192.54 to 192.168.100.5
My question is , do you see any communication problems because I change the IP Address on the Panelview Plus 700 screen ?
Thanks so much for your help.