Citect configuration for dual LAN Card

[vaidyanikhil24]

I have vijeo citect 7.4 installed on my pc which is having two lan cards configured for two different netowork.
Network 1 IP - 192.168.1.4
Network 2 IP- 10.0.32.115

Network 1 is my local network which is having all the PLC, SERVER and 1 display client.
Network 2 is my company's IT network which I would like to use for display client at some other location.
How would I be able to configure my server for this???

 

[Wasan]

Maybe assign all server on project as Network 2 then try to run first. If it fine you could config computer setup wizard on client computer to be control client or view only client.