Nubbb
Member
I am new to PLCs and have purchased a CLICK PLC for what I hope is a very simple application.
I wish to hit a Start Button and have the PLC do 10 cycles of:
A: turn on SSR relay #1 for 5ms, then turn it off. (5ms on time)
B: turn on SSR relay #5 for 5ms, then turn it off. (5ms on time)
C: Wait for one minute.
At the end of 10 minutes, & 10 cycles each relay should have been on for a total of 50ms and the Start Button Re-Armed.
Can anybody give me some guidance? This will be my first experience with a PLC. Thanks So Much in advance.
I wish to hit a Start Button and have the PLC do 10 cycles of:
A: turn on SSR relay #1 for 5ms, then turn it off. (5ms on time)
B: turn on SSR relay #5 for 5ms, then turn it off. (5ms on time)
C: Wait for one minute.
At the end of 10 minutes, & 10 cycles each relay should have been on for a total of 50ms and the Start Button Re-Armed.
Can anybody give me some guidance? This will be my first experience with a PLC. Thanks So Much in advance.