I have a CLX processor with a 1756-ENET connected to a CLX gateway that has a 1756-ENET and a 1756-DHRIO. On the DH+ side I have a PLC 5/30. I want to send a message from the CLX to the 5/30. I think I have to set up a routing table in the 1756-DHRIO in the gateway to get this to work. Anybody got any hints on how to send this across or have a link to the right knowlegebase document. I have not hit on the one that addresses exactly what I am doing. I have found this one: http://domino.automation.rockwell.c...5737E486F21C4D3185256AFB006A165F?OpenDocument