Rory Erickson
Member
Hello,
First post. I have done some AD programming before but not too deep. On a project I'm working on now, there is a Cmore with about 80 timer inputs that need to be entered in seconds. Is there a quicker way to convert to .1 second timers in the PLC than LD , MUL x 10 , OUT for every timer?
Thanks!
First post. I have done some AD programming before but not too deep. On a project I'm working on now, there is a Cmore with about 80 timer inputs that need to be entered in seconds. Is there a quicker way to convert to .1 second timers in the PLC than LD , MUL x 10 , OUT for every timer?
Thanks!