Cognex on Ethernet/ip

Timeismoney08

Member
T
Join Date
Jul 2012
Location
United States
Posts
312
Is the Camera considered an IO device or do I need the full scanner software to work with it? It seems there are two levels to a scanner communication. One just for IO devices and another for everything else.

Another way of putting this, is the Cognex 7000 series implicit or explicit communication?


Thank you in advance!
 
Last edited:

Similar Topics

C
Cognex In-Sight 5000 - Ethernet/IP RSLogix
I have a Cognex In-Sight 5000 series camera reading a barcode and sending the data string using the WriteEIPBuffer function. The camera is...
Replies
3
Views
3,192
benaiahhenry
benaiahhenry
Steve Etter
Cognex , Mitsubishi & Ethernet
Hi All, I am working with a Cognex 5100 camera system and a Mitsubishi Q02 series PLC. Both are connected to a common Ethernet hub and I can...
Replies
0
Views
4,979
Steve Etter
Steve Etter
S
S7 Ethernet message to Cognex 5100
Hi. I need to do a network trigger for a Cognex Camera from a S7 (CPU317) processor. This has to be done through Ethernet. I am having problems...
Replies
4
Views
6,625
LadderLogic
LadderLogic
E
Cognex dataman 280 barcode reader input to rslogix 5000
Hello, I am trying to read a barcode scanner input using a cognex dataman 280 barcode reader, store it another string, the compare with another...
Replies
1
Views
117
Emmabod
E
croakus
Re-purpose a Cognex Sensorview monitor
We finally replaced our Cognex Checker with an IV-3 and I'm wondering if can replace the s/w in the monitor with anything else. I haven't been...
Replies
0
Views
111
croakus
croakus
Back
Top Bottom