chrismarlin
Member
Dear All,
I hope someone can reach out urgently. I had a major breakdown in the PLC Control system due to sudden power outage in the plant.
To cut a long story short we had to re-upload the program, the program was successfully reloaded but currently we have no communication between OP30C and CP 5431 ( 6GK1543-1AA01).
We have encountered this issue a month ago and we have throughly investigated the issue and according to an experienced Siemens engineer we are missing the Comgraph V.2.32 or A2.32 to configure the communication processor with the OP30C and S5.
If anyone is so kind to upload a link for the Comgraph V.2.32 or A2.32, I will buy them a big round of beer
Thanks a million in advance.
Chris
I hope someone can reach out urgently. I had a major breakdown in the PLC Control system due to sudden power outage in the plant.
To cut a long story short we had to re-upload the program, the program was successfully reloaded but currently we have no communication between OP30C and CP 5431 ( 6GK1543-1AA01).
We have encountered this issue a month ago and we have throughly investigated the issue and according to an experienced Siemens engineer we are missing the Comgraph V.2.32 or A2.32 to configure the communication processor with the OP30C and S5.
If anyone is so kind to upload a link for the Comgraph V.2.32 or A2.32, I will buy them a big round of beer
Thanks a million in advance.
Chris
Last edited: