robw53
Member
hi guys,
i am trying to setup comms on my 1500 LRP Series-c with a NET-ENI so i can talk with my panelview + but im experiencing some problems, when i am in rslogix500 and i go to processor comms and change it to ethip and looks like its going well, download via serial with comm port 0 8pin mini din, it does come up letting you know your changing comms to something else than what you are currently using and you may loose communications, and do you want to continue, but after all that the driver still doesnt change in the 500 window it stay on df1, also do i need to setup comm port 1 or can you use either 0 or 1 without having to enable anything, i have looked in the manual and crnt seam to find anything suitable
FYI i am using a 1761-cbl-pm02
i am trying to setup comms on my 1500 LRP Series-c with a NET-ENI so i can talk with my panelview + but im experiencing some problems, when i am in rslogix500 and i go to processor comms and change it to ethip and looks like its going well, download via serial with comm port 0 8pin mini din, it does come up letting you know your changing comms to something else than what you are currently using and you may loose communications, and do you want to continue, but after all that the driver still doesnt change in the 500 window it stay on df1, also do i need to setup comm port 1 or can you use either 0 or 1 without having to enable anything, i have looked in the manual and crnt seam to find anything suitable
FYI i am using a 1761-cbl-pm02
Last edited: