Eduardo Pelegrin
Member
- Join Date
- Apr 2003
- Posts
- 25
I need to know the steps to communicate Citect 2016 with Siemens S7 1500 using S7TCP driver.
Thanks
Thanks
Thanks a lotThe attached pdf is from the S7TCP.chm file.
Hi Eduardo,Hi ZamcuD, which Citect versión are you using?. Which S7 PLC are you trying to connect to Citect?.
Regards
The whole point of the S7TCP driver is to read/write addresses symbolically. I managed to get the older PSDIRECT driver working with the S7-1500 using PLCSIM Advanced V2.0 SP1 (originally it worked with S7-300), and in this case I had to set to non-optimized using absolute addresses.I doubt that Citect can read S7-1500 addresses symbolically (I might be wrong).
1.09.06.000 - 05/04/2017
Fixed in this version:
Comment:
Fixed the driver help to specify the driver need Citect SCADA v7.50 or later.
May be y
our 7.40 does not support S7TCP driver