MarkTTU
Lifetime Supporting Member
I got this in a PM this morning and since I don't know jack about the SLC500 I thought I'd post it here and send the guy a link to the thread.
-------------------
I am new to the forum. I work offshore and unfortunately I am the only ET/IT here.
What I have is an AB SLC 500 with a remote rack. the master rack has the 9 pin available but the the ethernet connection is in use.
I thought the RSLOGIX 500 had an autto configure feature. I would like to connect, communicate and download the program from the module and compare it to an older back up. The circuit I am chasing seems simple and I can not find any field device acting up.
Hope you can assist.
Thanks
I just finished building a Null modem cable to interface with the allen bradley PLC
--------------------
-------------------
I am new to the forum. I work offshore and unfortunately I am the only ET/IT here.
What I have is an AB SLC 500 with a remote rack. the master rack has the 9 pin available but the the ethernet connection is in use.
I thought the RSLOGIX 500 had an autto configure feature. I would like to connect, communicate and download the program from the module and compare it to an older back up. The circuit I am chasing seems simple and I can not find any field device acting up.
Hope you can assist.
Thanks
I just finished building a Null modem cable to interface with the allen bradley PLC
--------------------