Hi , i have one task i have to stablished communication link b/w modicon & S7 300 Plc over Ethernet TCP/IP protocol. connection medium b/w them is Fiber optic i am using SCALANCE X 204-2 to convert Fiber optics in Ethernet TCP/ip protocol. can any body send me the connection diagrams
COMMUNICATION LINL B/W MODICON & S7 300 PLC
- Thread starter shabi
- Start date
Tom Jenkins
Lifetime Supporting Member
You should check with your PLC suppliers. The native Ethernet for Modicon is Modbus/TCP and the native Ethernet for Siemens is Profinet - essentially Profibus over Ethernet. I'm not sure they have directly compatible protocols. You may need a communications bridge.
You can use 343-1 communication processor in S7-300 or S7-300's with integrated Ethernet interface and write your own program to communicate via Modbus TCP protocol. I've tested it with some of applications using my own Modbus TCP Master code for S7 PLC's.
Last edited:
Similar Topics
Hello every one hope all are enjoying.
I have an issue to connect omron NS10 HMI with CJ1M-CPU11 ETN plc
I have made all required setting as...
Hello guys,
I'm working with Emerson's ControlWave Micro and I need to configurate the controller as a DNP3 outstation.
It shows me error -8002...
So i need to communicate my VFD (LS Electric iS7) with XGL PMEB module i successfully set the gsd file now i cant figure out how the data works...
Greetings. I currently have several systems in operation mainly using Aromat PLCs and Beijer Exter HMIs. The HMIs email to VText.com to send us...
Hello there,
I am having two plcs of mitsubishi (FX5U and R32ENCPU) and one GOT hmi (GS2110 WTBD-N) , I am able to ping all three devices from...