Compact Logix 1769HSC

Gunner

Member
G
Join Date
Sep 2003
Posts
25
Hi All,
Can anyone post a sample code on how to reset a 1769HSC using a Compact logix L35E processor
I have tried to use the soft preset but it does not reset the HSC until it has stopped counting.
I need to reset the HSC on the run.
Rockwell support have been of little assistance
Any help will be greatly appreciated
 

Similar Topics

R
Connecting a Fuji controller to a Compact GuardLogix controller
Hello all -- I have a Fuji controller that has an ethernet card and am looking to translate the code to a GuardLogix 5380. Any suggestions on how...
Replies
0
Views
5
RAN_derson
R
Thorizle
Logix Studio 5000 Compact Logix V33 V34 V35 issues with EDS file not showing correct data types when imported
Hello Friends, I am working on a new project to add in a NU-EP1 from Keyence to a 5069-L306ERS2. The EDS file registration goes just fine with no...
Replies
0
Views
27
Thorizle
Thorizle
P
Communication Between Compact Logix and Guard Logix Error
Hello Everyone, I have a issue with communication between two different PLCs. So here is the facts, The Master PLC is Guard Logix 5069 with IP...
Replies
4
Views
142
Ken Roach
Ken Roach
M
Compact Guardlogix 5380 to Emerson deltav ok300 communication
gents, I am trying to configure communication with EMERSON PK300 controller through port A1 using generic ethernet communication module . I could...
Replies
0
Views
145
MohamedSK
M
V
What transistor model for blown Compact Logix Output card?
I've blown the Output Transistor on the Output Card of a Compact Logix 1769-L24ER-QBFC1B It says J378. Does anyone know the replacement part...
Replies
3
Views
220
pk_test
P
Back
Top Bottom