Compact Logix and printer

gregmiko

Member
Join Date
Mar 2011
Location
IL
Posts
4
Need to print a plastic (mylar)tag (4"x6") with several lines of data and then cut (separate) it for auto delivery to product.Looking for a termal or similar printer to work with AB CompactLogix PLC - best would be Ethernet communication.
 
We use Sato printers here and at about 8 other mills.
We don't use the auto cutters but they are an option.
Most of these printers use Ethernet but they connect
to a computer not to a PLC directly.
I wrote the programs in Delphi and I could strip one down
and post it if you wish.
Steve
 

Similar Topics

I have a system that uses a compact logix processor. I use a RTA 435NBX ascii gateway to send a sting to an Intermec PM43 printer. This system...
Replies
1
Views
2,461
Hi all, I've been asked to quote a system involving a zebra printer on a compact logix. Nothing too complicated, just need to set it up to print...
Replies
5
Views
4,828
I am looking for some feedback or recommendations on being able to print from 1769-L32E to an Ethernet Zebra Printer. Any examples of your setup...
Replies
20
Views
21,330
Hi friends, I want to configure compact logix L32E PLC with S4M00-2004-0200T Zebra printer on ethernet network, and i want to send some data...
Replies
0
Views
5,522
Hello Everyone, I have a issue with communication between two different PLCs. So here is the facts, The Master PLC is Guard Logix 5069 with IP...
Replies
4
Views
103
Back
Top Bottom