comunication between Siemens Comfort panel and AB PLC

angi

Member
A
Join Date
Jan 2010
Location
us
Posts
361
hi guys

I just got a problem here, I set up the comunication between HMI and PLC, I could ping PLC from HMI, but they did not connect with each other under run mode. I attach the configuration, hope somebody could help me figure out the reason.

Thanks

Connection.jpg
 

Similar Topics

S
Ethernet comunication between Siemens S7-300 and Control logic.
Hi everybody , I have to wonder if it is possible to exchange data and how. Someone knows where I can find material about? any help is...
Replies
4
Views
1,732
widelto
widelto
J
problem comunication between PLC and SCADA
hallo guy's, I have problem in comunication between PLC and SCADA. :shoot: I connected the plc with the scada and codesys due the keep server...
Replies
0
Views
1,471
jakob88
J
H
issue comunication between dataman8100 and wago
well i have a issue in my job i need to comunicate one escanner dataman 8100 and one plc wago by codesys but i can't. i put the diferent protocols...
Replies
2
Views
971
hanzo
H
J
Comunication between ML 1400 and Red Lion HMI G304K200
Hi I want perform the comunication (ethernet) between ML 1400 (IP: 192.168.1.11)and Red Lion HMI G304k200 (IP: 192.168.1.20). I wrote the...
Replies
6
Views
5,241
ja_varela77
J
A
comunication between Barcode scanner and PLC
Hi guys I got a question about Barcode scanner and PLC: my SLC 5/04 will send some strings to a PC by using Channel 0, and a Barcode scanner also...
Replies
12
Views
11,286
Lancie1
Lancie1
Back
Top Bottom