Paul351W
Member
I apologize if this has been asked before, but I didn't find anything right away.
I am going to have a control setup with 2 L62 processors, one doing facility control, and another one doing high speed hydraulic controls. They will both be on the same local ethernet with the Panelviews and remote racks for the facility control processor.
How exactly do I go about sending data from one processor to the other? The only example in the help file talks about resetting a module status or something to that effect and it didn't help me. I have tags set up in both processors, but I think I'm getting hung up on the Path, as I'm getting a 16#0004 error on the communications tab.
I am going to have a control setup with 2 L62 processors, one doing facility control, and another one doing high speed hydraulic controls. They will both be on the same local ethernet with the Panelviews and remote racks for the facility control processor.
How exactly do I go about sending data from one processor to the other? The only example in the help file talks about resetting a module status or something to that effect and it didn't help me. I have tags set up in both processors, but I think I'm getting hung up on the Path, as I'm getting a 16#0004 error on the communications tab.