All,
I passed couple of times through this topics, and read couple of manuals, but still im having an issue with redundancy. I had redundancy setup by me and running for longer period already, and now situation is as following many RIOs (ACNRs and some panelviews on cnet are dead) are disconnected due to extended maintenance. and we need to run equipment that is still on, but im getting very often, almost every 5min, a swtchover from Primary to secondary, and i loose network for a moment every time when it is switching, and emergency goes down due to same reason. in 1756 RM/B Redundancy module Event log every time before initiating switchover I see moderator missing on network (module name 1756-CN2R) and NEtwork transition to not attached (module name 1756-CN2R) and (BD) SYS_FAIL_L active in partner RM and SYS_FAIL_L_Active and then is switchover attempted.
I dont know how to see in networx which module is moderator, and what is causing this problem...