tenerowicz Member T Join Date Mar 2004 Location Massachusetts Posts 3 Mar 18, 2004 #1 How do you convert an existing TI program to S7?
RRobbins Lifetime Supporting Member Join Date Dec 2002 Location Richmond, VA Posts 405 Mar 18, 2004 #2 When you install Step7, there is a program that gets installed that converts TI405, one does TI545 and another does S5 conversions to Step 7.
When you install Step7, there is a program that gets installed that converts TI405, one does TI545 and another does S5 conversions to Step 7.
tenerowicz Member OP T Join Date Mar 2004 Location Massachusetts Posts 3 Mar 19, 2004 #3 Great. I was able to convert my file and insert it into an S7 Project. It is STL and I would like it in ladder. Is there a way to do this within S7 easily and accurately?
Great. I was able to convert my file and insert it into an S7 Project. It is STL and I would like it in ladder. Is there a way to do this within S7 easily and accurately?
rdrast Lifetime Supporting Member Join Date Apr 2003 Location South Carolina Lowcountry Posts 5,544 Mar 19, 2004 #4 Not that I know of. The translator generates STL code. But, once it's been generated, you can go through and make it pretty I guess.
Not that I know of. The translator generates STL code. But, once it's been generated, you can go through and make it pretty I guess.