idir.mahrouche@gmail
Member
Hello,
I have a servo motor running a conveyor belt system. I do not have the exact circumference of the head pully and therefore I get some shift whenever I run the conveyor for one cycle.
I do have a sensor seeing the 47 (full cycle) mounted containers on the belt.
What would be the best method to track the position of each container at any moment while conveyor is running.
Regards,
I have a servo motor running a conveyor belt system. I do not have the exact circumference of the head pully and therefore I get some shift whenever I run the conveyor for one cycle.
I do have a sensor seeing the 47 (full cycle) mounted containers on the belt.
What would be the best method to track the position of each container at any moment while conveyor is running.
Regards,