Hi to all!
I have a serious problem with a desktop migration from NT to XP.
Current configuration of my system is:
- desktop with Windows NT 4.0 SP6 (build 1381),
- WinCC V4.02/SP3,
- CP5611 PCI (MPI).
I would like to move to PC with Windows XP SP1 (build 2600) and use the same WinCC and CP5611.
The problem is that after installation under XP it doesn't work:
- after reboot winlogon displays a WlxNegotiate error window: "Origin GINA returned version=0001004"
- after use of "Read" button in Control Panel -> PB/PC Interface -> CP5611(MPI) -> Diagnostics there is a error displayed: "Error 0x0313: Transmition rate does not match network transmition rate or wrong interrupt".
- There is an controller's driver error on hardware device list.
What should I do to make this installation possible?
Regards,
Szpachel
I have a serious problem with a desktop migration from NT to XP.
Current configuration of my system is:
- desktop with Windows NT 4.0 SP6 (build 1381),
- WinCC V4.02/SP3,
- CP5611 PCI (MPI).
I would like to move to PC with Windows XP SP1 (build 2600) and use the same WinCC and CP5611.
The problem is that after installation under XP it doesn't work:
- after reboot winlogon displays a WlxNegotiate error window: "Origin GINA returned version=0001004"
- after use of "Read" button in Control Panel -> PB/PC Interface -> CP5611(MPI) -> Diagnostics there is a error displayed: "Error 0x0313: Transmition rate does not match network transmition rate or wrong interrupt".
- There is an controller's driver error on hardware device list.
What should I do to make this installation possible?
Regards,
Szpachel