Hi all,
I am working with a MicroLogix 1400 1766-L32AWA and a Red Lion G308.
The ML has 20 inputs and 12 outputs. I am trying to set a flag tag for inputs 16 thru 20. For inputs 0-15 I set the Crimson address to be I 000:000 Little Endian Bit 0-15. So for PLC address I:0/16-20 would I set it up as I 000:001, Little Endian Bit 0-3 in Crimson?
I don't have the PLC here to test it out and want to make sure I have my addressing correct when I get on site.
One more question that ties in with the first: I seen the terms single slot and double slot addressing used on the forum. Would an example of single slot addressing be I:0/16 and double slot addressing would be I:0.1/0? Am I on the right track with my thinking?
Thanks for the help.
I am working with a MicroLogix 1400 1766-L32AWA and a Red Lion G308.
The ML has 20 inputs and 12 outputs. I am trying to set a flag tag for inputs 16 thru 20. For inputs 0-15 I set the Crimson address to be I 000:000 Little Endian Bit 0-15. So for PLC address I:0/16-20 would I set it up as I 000:001, Little Endian Bit 0-3 in Crimson?
I don't have the PLC here to test it out and want to make sure I have my addressing correct when I get on site.
One more question that ties in with the first: I seen the terms single slot and double slot addressing used on the forum. Would an example of single slot addressing be I:0/16 and double slot addressing would be I:0.1/0? Am I on the right track with my thinking?
Thanks for the help.