Richard Webb
Member
I am having a problem understanding how to assign tags for a simple stop - start push buttons. The Logix 5000 routine to stop and start the pump is all in function blocks. I have used L5K to migrate all the tags to Crimson 3.1.
M6520A On (WATER PUMP 1)
HMI1 PV1:IData(9).8 BOR_12 (In 1)
I find the Tag BOR_12 In1 in the address of all the tags, but it doesn't work when I connect to the PLC.
HMI1 PV1:OData(9).6 SETD_02 (Out)
However, SETD_02 Out I am using as the "RUNNING" indication, that works.
Some help would be much aprreciated.
M6520A On (WATER PUMP 1)
HMI1 PV1:IData(9).8 BOR_12 (In 1)
I find the Tag BOR_12 In1 in the address of all the tags, but it doesn't work when I connect to the PLC.
HMI1 PV1:OData(9).6 SETD_02 (Out)
However, SETD_02 Out I am using as the "RUNNING" indication, that works.
Some help would be much aprreciated.