Edmhydraulics
Member
Hey folks, looking for a bit of help. I have a G15 HMI, I am using Crimson 3. I have created a program with contents:
if (Type == 150)
Test_Pressure_Setpoint = 450;
Now I want the Tag, Test_Pressure_Setpoint to display 450 when the operator inputs 150 into tag, Type. Seems simple enough, but it wont work when I use the emulator.
Any thoughts, this is probably something really easy that I am missing.
Thanks
Edm.
if (Type == 150)
Test_Pressure_Setpoint = 450;
Now I want the Tag, Test_Pressure_Setpoint to display 450 when the operator inputs 150 into tag, Type. Seems simple enough, but it wont work when I use the emulator.
Any thoughts, this is probably something really easy that I am missing.
Thanks
Edm.