data share betwwen two s7 plc... how to share and configure it..?
- Thread starter teh
- Start date
how to share the data from " data block " between 2 siemens s7 plc?PLucas
Member
Teh
The simple way would be to have the two PLC's connected on MPI and use the SFC's X_GET and X_PUT (SFC 67 and 68)
If you give us a bit more info on your setup and how much data you want to 'share' then we could be more specific.
Paul
The simple way would be to have the two PLC's connected on MPI and use the SFC's X_GET and X_PUT (SFC 67 and 68)
If you give us a bit more info on your setup and how much data you want to 'share' then we could be more specific.
Paul
Similar Topics
Hi, I have two systems each consisting of a Q03UDE connected to a Beijer E1070 all over Ethernet... I would like to share some REAL's over the...
How do you setup two processor (S7) to share the same Data Block?
Thanks
rmonroe
Hi,
How to get data from multiple Mitsubishi Q03UDVCPU into master PLC Q03UDVCPU through QJ71E71-100 ?
When i load my client a[plication the following error is recorded in factorytalk view studio log
Failed to load data server...
Hello, im quite new and still learning. I would like to ask is it possible for FATEK PLC to read data value more than 16k? I'm trying to move my...