soujiro
Member
Hi, I'm from Mexico.
I have some time working with small PLC programs but now I have a quite huge task (well, for me).
Few months ago the company transfer a couple of machines to my city.
The machines use GE Fanuc 90-30 PLC's, these PLC's were communicated through serial port to a PC (Win 95), with Direcsoft DDE.
GESNP (wonderware) was used as a protocol server to take the data of production into a "intouch" program to print production reports.
The problem is that the communication with the PLC is lost.
This stuff is quite old, and there is not any documentation
So any help, suggestions are welcome.
Thanks in advance
I have some time working with small PLC programs but now I have a quite huge task (well, for me).
Few months ago the company transfer a couple of machines to my city.
The machines use GE Fanuc 90-30 PLC's, these PLC's were communicated through serial port to a PC (Win 95), with Direcsoft DDE.
GESNP (wonderware) was used as a protocol server to take the data of production into a "intouch" program to print production reports.
The problem is that the communication with the PLC is lost.
This stuff is quite old, and there is not any documentation
So any help, suggestions are welcome.
Thanks in advance