I am in a need to replace a SEW Eurodrive Movidrive Compact drive
to a fan application ,but I need to use a drive that is for another
project, and I am using a Master/Slave. How can I delete the IPOS
section so it does not look for the encoder. I am at another
location, and the cable and adapter are not availible.I only have
the keypad. I chose 802 Factory Settings ,but it is still looking
for an encoder.
Thanks in advance,
to a fan application ,but I need to use a drive that is for another
project, and I am using a Master/Slave. How can I delete the IPOS
section so it does not look for the encoder. I am at another
location, and the cable and adapter are not availible.I only have
the keypad. I chose 802 Factory Settings ,but it is still looking
for an encoder.
Thanks in advance,