I have double acting valve.
this need to be opened and closed .
now Valve remain open as long as power is connected to slenoid on power loss valve closes.
the solenoid is 4 way single coil
http://www.flowlinecontrols.com/solenoids/solenoid-valve-12.aspx
Is it possible to make it function in this manner give power to solenoid for few seconds and valve opens supply to solenoid is turned off and valve remains in OPEN
then next time when power is given to solenoid for few second it changes state open to close. this power also turns off after few seconds
Basically 3 second pulse for ON and 3 second Pulse for off .
this need to be opened and closed .
now Valve remain open as long as power is connected to slenoid on power loss valve closes.
the solenoid is 4 way single coil
http://www.flowlinecontrols.com/solenoids/solenoid-valve-12.aspx
Is it possible to make it function in this manner give power to solenoid for few seconds and valve opens supply to solenoid is turned off and valve remains in OPEN
then next time when power is given to solenoid for few second it changes state open to close. this power also turns off after few seconds
Basically 3 second pulse for ON and 3 second Pulse for off .
Last edited: