controlconcepts
Lifetime Supporting Member
Well Good Sunday mourning to you all.. To start out my laboratory is getting a bit out of control lol ... My Setup consists of
SLC 5/04 rack A @ node 1
Master rack ( So far )
and is method of comms to DeviceNet Network
slc 5/04 rack B @ node 2
plc5 5/40E with Ethernet rack c @ node 4
rack A
1747-SDN/B REV. 6.002
rack B
1747-SDN/B REV. 2.001
( I know the revision on this one will give me some problems )
rack c 1771-SDN/B REV. 4.006
( also know now from reading posts that for what I want to accomplish this scanre would need to be a 1771 sdn/ [C] becuase [B's] can only be masters )
RIO
3 1794 ADN
RIO rack one
1 adn 2 OB16A/P
configured as 6 input bytes and 4 output bytes
RIO rack two
1 adn 2 IB16
configured as 6 input bytes and 4 output bytes
RIO rack three ( problem rack )
1 adn 4 IB16 2 OB16A/P
I have tried many different configurations to no avail
Rslinx
2.57.00.14
RsNetWorx
10.01.00
Please forgive me if there are some questions that have been answered on here allready.. I have searched but wayy to many topics to sort thru..
OK first off I have worked on enough DeviceNet to know enough to be dangerous lol.. But have never really setup and commission many. Most were very simple setups. So I am not new to the world of this sort of communications..
First Question
HOW many BYTES should each module take up?
I have looked and looked but cant find a definite answer.
Second question and I know it maybe possible but am not going to cry a river over it. The scanner in rack B.. Is rev 2 I wont let me send any form of a change to it from rack A ( Master and method of comm's to Network ) in RsNetWorx.
every time I try Communication
error: 12 : Error response received: Resource unavailable
could this be that Pass thru communications is the problem??
So thank you ALL in advance again and there probally will be more to come for Questions
Matt
SLC 5/04 rack A @ node 1
Master rack ( So far )
and is method of comms to DeviceNet Network
slc 5/04 rack B @ node 2
plc5 5/40E with Ethernet rack c @ node 4
rack A
1747-SDN/B REV. 6.002
rack B
1747-SDN/B REV. 2.001
( I know the revision on this one will give me some problems )
rack c 1771-SDN/B REV. 4.006
( also know now from reading posts that for what I want to accomplish this scanre would need to be a 1771 sdn/ [C] becuase [B's] can only be masters )
RIO
3 1794 ADN
RIO rack one
1 adn 2 OB16A/P
configured as 6 input bytes and 4 output bytes
RIO rack two
1 adn 2 IB16
configured as 6 input bytes and 4 output bytes
RIO rack three ( problem rack )
1 adn 4 IB16 2 OB16A/P
I have tried many different configurations to no avail
Rslinx
2.57.00.14
RsNetWorx
10.01.00
Please forgive me if there are some questions that have been answered on here allready.. I have searched but wayy to many topics to sort thru..
OK first off I have worked on enough DeviceNet to know enough to be dangerous lol.. But have never really setup and commission many. Most were very simple setups. So I am not new to the world of this sort of communications..
First Question
HOW many BYTES should each module take up?
I have looked and looked but cant find a definite answer.
Second question and I know it maybe possible but am not going to cry a river over it. The scanner in rack B.. Is rev 2 I wont let me send any form of a change to it from rack A ( Master and method of comm's to Network ) in RsNetWorx.
every time I try Communication
error: 12 : Error response received: Resource unavailable
could this be that Pass thru communications is the problem??
So thank you ALL in advance again and there probally will be more to come for Questions
Matt