Hello,
The issue is that I have a machine with a PLC ELAU MAX-4 modules and a WAGO PROFIBUS, I monitor some of this data with a PLC SCADA, ELAU OPC server requires that you have the original application (the file *.pro) in CoDeSys, which I have not since the manufacturer machine does not give, if this is not possible communication. as protocol that is required is using this PLC by RS232 or Ethernet you have available. Anyone know?
Thank you very much.
Hola,
El asunto es que tengo una maquina con un PLC ELAU MAX-4 y unos modulos wago en profibus, deseo supervisar algunos datos de este PLC con un sistema Scada, el OPC server de ELAU requiere que tenga la aplicacion original (el archivo .pro) en CodeSys, el cual no tengo ya que el fabricante de la maquina no lo entrego, si este no se puede realizar comunicacion. Lo que
requiero es cual es protocolo que usa este PLC por el puerto RS232 o Eternet
que tiene disponible. Alguien lo sabe ??
Muchas gracias.
The issue is that I have a machine with a PLC ELAU MAX-4 modules and a WAGO PROFIBUS, I monitor some of this data with a PLC SCADA, ELAU OPC server requires that you have the original application (the file *.pro) in CoDeSys, which I have not since the manufacturer machine does not give, if this is not possible communication. as protocol that is required is using this PLC by RS232 or Ethernet you have available. Anyone know?
Thank you very much.
Hola,
El asunto es que tengo una maquina con un PLC ELAU MAX-4 y unos modulos wago en profibus, deseo supervisar algunos datos de este PLC con un sistema Scada, el OPC server de ELAU requiere que tenga la aplicacion original (el archivo .pro) en CodeSys, el cual no tengo ya que el fabricante de la maquina no lo entrego, si este no se puede realizar comunicacion. Lo que
requiero es cual es protocolo que usa este PLC por el puerto RS232 o Eternet
que tiene disponible. Alguien lo sabe ??
Muchas gracias.