Emerson UPS modbus communication problem

smartatuls

Member
S
Join Date
May 2013
Location
India
Posts
30
Hi,

I am trying to communicate to Liebert GXT MTX+ 6kVA UPS (Emerson) over Modbus RTU.

At present I am able to communicate via 03:HOLDING REGISTER (Address starts from 40004) but not able to communicate through 02:INPUT STATUS bits (Address starts at 10002). I am testing this communication using Modscan32.

The UPS status bits are at address 10042 onwards which i can not access/see because no communication happening. I need these status bits to be shown on SCADA.

Please help


smartatuls
 

Similar Topics

johnmck66
Emerson Liebert Ups Gtx2
Help, I need the idiot page - with the LED error codes and general startup procedure etc. I have 3 of these things driving me insane at present. I...
Replies
3
Views
3,027
timbo_uk
T
J
GE/EMERSON PACSystems
Does anyone know if it is possible to create a help file that would, when a user presses F1, bring up a custom help (that I made) about my...
Replies
2
Views
120
Steve Bailey
Steve Bailey
J
GE/Emerson Arrays with Functions
Two questions for GE/Emerson e.g. PACSystemsRX3i (CPE330): 1. Is it possible to use 2D arrays inside a function as a local member? (I can only...
Replies
0
Views
104
james13
J
M
Compact Guardlogix 5380 to Emerson deltav ok300 communication
gents, I am trying to configure communication with EMERSON PK300 controller through port A1 using generic ethernet communication module . I could...
Replies
0
Views
144
MohamedSK
M
S
Simulate/Force Analog Inputs with Emerson RX3i PACSystems?
Hi there, I'm doing some extensive testing and commissioning with a slew of new Emerson PACSystems RX3i PLCs. It would be convenient to...
Replies
5
Views
201
Steve Bailey
Steve Bailey
Back
Top Bottom