Hi,
I have a S7-1200 (214-1HG40-0XB0) connected to a SEW Movitrac MCX91A-CFN V4.0 through profinet.
Now I have a EZ2Z Singleturn encoder on my motor that I have to determine my position with through an HMI.
It is like that , that I can move my motor 1mm at a time (or hold the button to move them quicker) and that I've must be able to save my position and start my program from there on. When my program runs the encoder has to move every step 1mm in.
does anyone have an idea on how to program this?
I have a S7-1200 (214-1HG40-0XB0) connected to a SEW Movitrac MCX91A-CFN V4.0 through profinet.
Now I have a EZ2Z Singleturn encoder on my motor that I have to determine my position with through an HMI.
It is like that , that I can move my motor 1mm at a time (or hold the button to move them quicker) and that I've must be able to save my position and start my program from there on. When my program runs the encoder has to move every step 1mm in.
does anyone have an idea on how to program this?