Hello friends,
I am using Omron CP1E-N60DT1-D PLC with Pepperl Fuchs tvi50n rotary encoder 1000ppr. In CX-programmer 9.03.I need help for encoder value retention when power get fail.
I am able to count encoder values using PRV instruction on DM100 and can see values at A270 and A271.Encoder should move in both direction F/W and REV. Can you suggest me logic for encoder retention or any alternative encoder which will be configure with same PLC.
Thanks in advance
I am using Omron CP1E-N60DT1-D PLC with Pepperl Fuchs tvi50n rotary encoder 1000ppr. In CX-programmer 9.03.I need help for encoder value retention when power get fail.
I am able to count encoder values using PRV instruction on DM100 and can see values at A270 and A271.Encoder should move in both direction F/W and REV. Can you suggest me logic for encoder retention or any alternative encoder which will be configure with same PLC.
Thanks in advance