error alm 4.0 not start

boonzhoo

Member
B
Join Date
Jan 2009
Location
Thailand
Posts
6
automation license manger not run
i use winxp sp3 now i use step7 sp4 with automation license manger 4.0 now show error. See pic

alm4 error.JPG
 

Similar Topics

S
EQU string comparison error in Studio 5000
I'm trying to compare strings in Studio 5000 on an Allen Bradley 1769-L33ER and came across this weird incorrect string comparison. Neither of the...
Replies
10
Views
206
drbitboy
drbitboy
E
Sigmatek CP626 ROM DOS ERROR
Hi All, I bought an old machine and I'm trying to get it running. It's a Pemas injection molding press running a Sigmatek control system with a...
Replies
0
Views
41
eigdonylo
E
M
Error when reading from PLC GX Developer
Hello, When I try to read from the PLC, the following error occurs: There is no project name. Failed to read the intelligent function module...
Replies
1
Views
84
parky
P
L
FactoryTalk Linx Ethernet config error
Hello everyone I have the next issue with FactoryTalk Linx, when i configure the Ethernet driver and try to find the IP Address of the PLC Device...
Replies
0
Views
61
Lawrence Alcocer
L
C
Siemens OP7 error $613 DB-error No. 11 (0: 15)
Hi, First time user of S5 Siemens. Is there any solution on how to solve this kind of error. HMI OP7 $613 DB-error No. 11 (0: 15) Siemens PLC...
Replies
9
Views
173
parky
P
Back
Top Bottom