Experience in the real World is the best
Experience in the real World is the best..
We use this simulator program to make a student get the concept about
PLC..After sometimes..He will learn with real pLC..(eventhough difference brand)..
I agreed with Mike William..
However in this case..if Jay want to learn at home ..he can not bring
PLC..from the lab..so..by some simulator program should be nice for him to study..
I have bought several program Simulation..for Robot..for plcs..
for Pneumatics ,Hydraulics..
Why?
Before ..student go to the real World application
They should learn something..prepare his chance to reduce their mistake..
For example..We have bought Robots(Manupulator)and quite expensive..
When we begin with the Real Robot..if the student make wrong program to control robot..What happen? sometimes we lost money for repair..or maintainance..Then I..let him design by his own program..and simulate
on the computer first after check..OK.. then tranfer the program to the controller of real Robot
What happen if wrong program when simulate on the computer..
Notthing..damage..or harm the student..(smile)
Also, with simulation program ..we can reduce the cost....
A big budget to buy 10 Robots for 20 students..
but 2 robot include Simulation Programs (in 20 computers) quite big dif. budget (good and cheaper)
I have chance to visit several countries....
One little country near Iraq..use a lot of Simulation program to teach..Not only this..His Student has done a lot project with
simulation program..I was serprise with ..some momentum simulator..
I was wondering when I see Robot playing Rubiq (I am not sure to spell this name )..and on the screen of the computer show the same thing..
I post some picture of Mechatronic's Lab in RIT.Nonthaburi Campus..
the Price of the Robots in this picture more than some modular car..
(Smile)
platootod
Mechatronic RIT.Non