fwilliams83
Member
I am currently converting an old PLC-5 to a ControlLogix platform, and I want to capture all the alarm setpoint data etc from the PLC-5. Obviously, I can go through the data files one by one and record all the information I want. However, this will be a very painful laborious process which I'm keen to avoid.
I know I can print a report with the current data, but this essentially gives very little benefit over just going through the actual RSlogix5 datafiles.
I would ideally like to export all of the data as a CSV file (or similar) in a format similar to editing the database in Excel but with an extra column for current data. All of the tags I care about have symbols/descriptions associated with them.
Does anyone have any tips on how this may be achieved?
I know I can print a report with the current data, but this essentially gives very little benefit over just going through the actual RSlogix5 datafiles.
I would ideally like to export all of the data as a CSV file (or similar) in a format similar to editing the database in Excel but with an extra column for current data. All of the tags I care about have symbols/descriptions associated with them.
Does anyone have any tips on how this may be achieved?