FacktoryTalk View add picture with VBA control

arakhl

Member
A
Join Date
Jan 2020
Location
US
Posts
9
Hello

I am trying to add picture via activex control (Microsoft Forms 2.0 Image)

my command is "Image1.Picture = LoadPicture("C:\aaa.bmp")"

but I am getting this error message "Method 'Picture' of object 'IImage' failed"

thank you
 

Similar Topics

A
FacktoryTalk View Studio Display Userform
Hi Friends I need to run userform(display) when tag status changes for example from 0 to 1 thank you
Replies
5
Views
1,884
arakhl
A
D
Setting a Tag based on a Display shown in FVTalk View Studio SE
Note: I'm VERY new to FTView studio (ME and SE flavors), so pardon my question if it's poorly phrased or just ... derp. 🙃 I'm using FactoryTalk...
Replies
1
Views
18
Cheeseface
C
A
Factorytalk view clients freeze everytime I add a new routine in studio 5000
As the title says, all of the client HMIs at the plant freeze up for about 5-10 minutes everytime I or a vendor make new routines or new tags in...
Replies
4
Views
62
dmroeder
dmroeder
U
Factorytalk View ME with RSLogix500 with SLC5/03 PLC
Hello, I want to connect the Factorytalkview ME with rslogix500 to see the live response of HMI buttons in Rslogix500 ladder code . I am using PLC...
Replies
6
Views
118
thinkpad
T
E
Panel view 1000 MCB tripping after initial power up
We have a panel view 1000 powered by 230VAC protected by a 16A type 2 MCB. After initial power up of the MCC, the MCB trips and needs to be...
Replies
1
Views
61
James Mcquade
J
Back
Top Bottom