mrmss
Lifetime Supporting Member
Hey!
I have a client spec which reads as follows:
"Pop-ups shall be activated by the operator selecting the required icon. From the pop- up all operator actions must be followed by a confirmation, to enable the desired action; thus at least two keystrokes are required, to avoid accidental actuation of equipment."
I have a client spec which reads as follows:
"Pop-ups shall be activated by the operator selecting the required icon. From the pop- up all operator actions must be followed by a confirmation, to enable the desired action; thus at least two keystrokes are required, to avoid accidental actuation of equipment."
Has anyone implemented a FactoryTalk ME project which can throw up a 'yes/no' dialog rather than just do the action? Sounds simple but I want also have to keep the dialogues standard so I am trying to do it properly with GlobalObjects and Parameter Files etc.