FactoryTalk SE - Rotate Text
- Thread starter robertmee
- Start date
MartB
Lifetime Supporting Member
do you mean rotating as in an animation or simply placed at an angle?
Placed at an angle (or even 90 deg). Selecting and using the Rotate function doesn't do it.
MartB
Lifetime Supporting Member
I've never been able to do it, and trust me I've tried.
I usually use a .bmp with text generated in paint or similar software when all else fails.
I usually use a .bmp with text generated in paint or similar software when all else fails.
Similar Topics
Hello everyone
I have the next issue with FactoryTalk Linx, when i configure the Ethernet driver and try to find the IP Address of the PLC Device...
We are having issues with our viewpoint server randomly crashing and only loading the error page if anything at all. It lives on 3 servers all of...
Hello, I have a panelview plus that reads from 4 different PLC's. 2 of these used to be Micrologix PLC's and someone else went and updated them to...
Hi.
I need to create several alarm servers in an application, but first I need to know if there is any impact on communication, or if more...
Hello all,
I'm having trouble opening an application. After clicking open I'm prompted to login and after putting in username & password it...